Skip to content Skip to footer
Contact Us
0 items - $0.00 0
High-Precision
Close

Our Equipments

LITZ MV-1000 CNC Vertical Milling
Technical Feature: Travel

X Travel 1000 mm (39.37 inch)
Y Travel 500 mm (19.7 inch)
Z Travel 540 mm (21.3 inch)
Spindle nose to table
100- 640 mm (3.94-25.2 inch)

Spindle Speed: 8000 rpm
VERTICAL MACHINING CENTER CV–800
Technical Feature: Travel

X Travel 800 mm
Y Travel 450 mm
Z Travel 540 mm
Spindle nose to table
80-620 mm

Spindle Speed: 10000 rpm
FOCASEIKI PM-860 CNC VERTICAL MILLING
Technical Feature: Travel

X Travel 800 mm (31.5 inch)
Y Travel 600 mm (23.62 inch)
Z Travel 600 mm (23.62 inch)
Automatic tool changer

Spindle Speed: 8000 rpm
DMG CTX 310 ECOLINE
Technical Feature:

Max Swing Diameter – 330 mm
Max Turning Diameter – 200 mm
Stroke in Z axis – 455 mm
Max Chuck Diameter – 210 mm
Bar Capacity – 51 mm

Spindle Speed: 4000 rpm

FOCASEIKI -TP 750 CNC VERTICAL MILLING

Technical Feature:

Table Size – 700×400 mm
M/C Weight – 4200 kgs
Travel xyz – 700x500x500 mm
Spindle Nose – BT40
Spindle Max Speed – 12,000 rpm
Spindle Motor – 15 hp
ATC- 24 tool
Cycle – 50HZ

TOP WELL CONVENTIONAL MILLING

Technical Feature: Capability

Max Machine capability: (600*380)mm
Tolerance control: +/- 0.02mm

CPL 30 CAMPRO CNC LATHE

Technical Feature:

Chuck Size – 249.43 mm
Power – 19.4 kW
Max RPM – 3,000 RPM
Turning Dia – 297.18 mm
Swing – 497.84 mm
Machining Length – 596.9 mm
Tailstock – Yes
Control – CNC

CNC VERTICAL MILLING
Technical Feature:

X Axis Travel – 7.9″
Y Axis Travel – 17.3″
Z Axis Travel – 12.0″
A Axis (deg.) – 120 – -30
C Axis (deg.) – 360
Spindle RPM -10,000/16,000
Tapping RPM -6,000
Rapid Traverse – 1,969 IPM

LITZ MV-1000 CNC Vertical Milling
Technical Feature: Travel
X Travel 43.3″ Y Travel 24.4″ Z Travel 23.6″ Automatic tool changer

Spindle Speed: 12000 rpm

ROBO DRILL MACHINE

Technical Feature: Axis X – 500 mm

Axis Y – 380 mm
Axis Z – 300 mm
Table length – 650 mm
Table width- 400 mm
Max. part weight – 200 kg
Number of tool pockets – 3
Spindle taper – MAS BT 30

Spindle Speed: 8000 rpm

TAIWAN TAKIWASA CNC LATHE EX-106
Technical Feature: wing over bed – 360 mm (14.12”)

Maximum Turning length -325 mm (12.75”)
Bar Work Capacity – 43 mm (1.69”)
Spindle Speed – 60-6000 rpm
Spindle Nose – FLAT 140 mm (5.51”)
Through Hole Ø – 56 mm (2.2”)
Stroke of X axis – 280mm (11”)
Stroke of Z axis – 325mm (12.75”)

TAIWAN TAKIWASA CNC LATHE EX-106
Technical Feature: wing over bed – 360 mm (14.12”)

Maximum Turning length -325 mm (12.75”)
Bar Work Capacity – 43 mm (1.69”)
Spindle Speed – 60-6000 rpm
Spindle Nose – FLAT 140 mm (5.51”)
Through Hole Ø – 56 mm (2.2”)
Stroke of X axis – 280mm (11”)
Stroke of Z axis – 325mm (12.75”)

SENYANG HORISONTAL LATHE MACHINE-CW6280

Technical Feature:

Max swing diameter over bed: 800 mm
Max swing diameter over carriage 480 mm
Max. workpiece length 3000 mm

REINSHAW MH20i

Technical Feature: Positional

Repeatability – (2σ) 1.5μ m
Maximum extension bar – Em2 module 94.5mm
Sense Direction + ±X ±Y +Z
A axis 0°to 90°in 15°increments
B axis ±180°in 15°increments
Spatial Position: 168

GOODWAY GCL-2L CNC LATHE
Technical Feature:

MMax. swing diameter – 400mm
Swing over saddle – 280mm
Max.turning diameter – 250mm
Std.turning diameter – 220mm

LITZ CV-800 CNC VERTICAL MILLING
Technical Feature:

X Travel 800 mm (31.5 inch)
Y Travel 500 mm (19.7 inch)
Z Travel 540 mm (21.3 inch)
Tool number 24
Max tool diameter 100mm ( 3.9 inch)
Max tool length 305 mm ( 12.0 inch)
Max tool weight 7kg ( 15.4 lb)

HASEGAWA CHAMP - 21 MACHINE (JAPAN)
Technical Feature:

Turning dia.length mm: Dia 250X200 mm
Max.turning diameter mm: Dia 200mm
chuck: 6”
Rapid traverse rate m/min:25 m/min

LAGUN CONVENTIONAL MILLING MACHINE

Technical Feature:

Max Machine capability: (600*380)mm
Tolerance control: +/- 0.02mm